|
The World´s Only Thin Kerf, Low
Tensioned, Swedish Silicon Steel 1", 1 ¼", 1 ½" and 2"
Band Saw Blades
We produce low-tension, Swedish
silicon steel blades from 1- to 2 inches wide for many applications. We are
the only company that mills and induction hardens the teeth in every blade
we make. Our blades are used on everything from the smallest to the largest
band mills and resaws.
-
Our 1 ½” x .056 thick blade is specially designed to run on large band
mills, headrigs and high production resaws, such as the Wood-MizerÒ
LT70/300, Baker 36 Series, LogMaster, Accu-Trac, S & W & vertical Amish
mills. This blade’s beam strength and gullet depth combined with milled
and induction hardened teeth allow it to out perform any other blade that
is presently available today in both life & cutting speed.
-
Our 2” x .052 thick blade is specifically designed to cut grade lumber on
high-production band resaws, such as the Brewco 800/1600/1800 and large
band mills. This blade has exceeded our expectations and has given our
customers both longer blade life and faster feed rates over the bi-metal
blades commonly run on these saws. At approximately half the cost of a
bi-metal blade this is a true moneymaker.
- Our 1 ¼” x .045 thick blade has
become our most successful blade to date, running on small to medium size
band mills and resaws. This blade for its size is more stable and will cut
faster than any other blade on the market.
|
1" x ¾" pitch x .042
This blade is specifically designed to cut grade hardwood on band resaws
only. Expected production 5,000 + B.F.P.D. (board feet per day)
Available with .021 set per side.
1¼" x
¾" pitch x .042 and .045
These blades run best at 5,300 S.F.P.M. on 18" wheels or larger. Expected
production is about 1,600 to 2,000 B.F.P.D. Available with .019(frozen),
.021(resaw), .024(hardwood) and .029(softwood) set per side
1¼" x
7/8" pitch x .042 and .045
These blades run best at 5,700 S.F.P.M. on 18" wheels or larger. Expected
production is about 1,800 to 2,200 B.F.P.D. Available with .019(frozen),
.021(resaw & hardwood), .024(softwood) set per side
1½" x 7/8" and 1” pitch x .042
These blades run
best at 5,700 S.F.P.M. on 18" wheels or larger. Expected production is about
2,500 to 3,000 BF/Day. Available with .019(frozen), .021(resaw & hardwood),
.024(softwood) set per side
1½" x
7/8” pitch x .056
These blades run
best at 5,700 to 6,300 S.F.P.M. on 24" wheels or larger. Expected production
is about 4,000 to 8,000 BF/Day. Available with .019 (frozen) and .026
(hardwood/softwood) set per side.
1½" x 1" pitch x .056
These blades run
best at 5,700 to 6,300 S.F.P.M. on 24” wheels or larger. Expected production
is about 4,000 to 8,000 BF/Day. Available with .018 (frozen) and .023
(hardwood/softwood) set per side.
2"x 1" pitch x .042
This blade runs
best at 5,700 to 6,300 S.F.P.M. on 18" wheels or larger. Expected production
is about 2,500 to 3,000 BF/Day. Available with .021(hardwood/softwood) set
per side.
2"x 1"
pitch x .052
These blades run
best at 5,700 to 6,300 S.F.P.M. on 24" wheels or larger. Expected production
is about 8,000 to 25,000 BF/Day. Available with .018 (pallet/frozen) and
.023 (resaw/hardwood) set per side.
1 1/4"
Cobalt
This blade has highly hardened teeth and is used mainly for recycling
treated telephone poles and for cutting exotic hardwoods. |
